Configuring Fmc Telephones - Aastra OpenCom 100 Mounting And Commissioning User Manual

Fixed Mobile Convergence
gence – Using mobile telephones on the Aastra 800 / OpenCom 100 communica-
tions system". This manual is available as a PDF file on the OpenCom 100 commu-
nications system product CD.
14.1

Configuring FMC Telephones

The following steps are for activating the FMC feature and to configure FMC tele-
phones:
1. In the Configurator of the OpenCom 100 communications system, call up the
menu page System:Licences.Check to see whether the Aastra Mobile Client
entry has a green checkmark next to it, indicating there is a valid licence. Oth-
erwise you have to authorise the feature first.
2. Call the Telephony: Devices: FMC Phones menu page. Click on the Change
button. Enter an internal call number into the FMC Phone No. field which a
mobile telephone uses to dial into the communications system. Or you may
enter another internal FMC call number into the MWI Signaling phone
number field for signalling calls from the communications system. Confirm
with Apply.
These call numbers can usually be reached as extension numbers from
external sources or be called from external sources via the system connection.
On the Telephony: Call Distribution menu page, check the settings for the
Incoming DDI and Outgoing DDI call distribution, and assign extension
numbers to the FMC call numbers as needed.
3. Click on the New button to create a new FMC telephone. Enter a new internal
call number into the Phone No. field. You have to then assign this call number
to another existing user or create a new user. You can also select a previously
configured internal call number for parallel operation of an existing terminal
and mobile telephone under the same internal call number. Enter the desired
mobile call number with the prefixed line seizure code into the Mobile Phone
No. field.
Note: You should create an "FMC" user in the User Manager
and assign the two FMC call numbers to this user. MWI sig-
nalling requires the user belong to a user group with exter-
nal dialling authorisation.
Configuring FMC Telephones
181