MacDon D65 Operator's Manual page 251

2. Ensure six bolts (A) securing the motor mount to the chain
case are loose.
3. Slide motor (A) and motor mount (B) upward until chain (C)
is tight.
4. Ensure there is 3 mm (0.12 in.) of slack at the chain
midspan. Adjust it if necessary.
5. Torque nuts (A) to 73 Nm (54 lbf∙ft).
6. Install the drive cover. For instructions, refer to
Reel Drive Cover, page
214327
MAINTENANCE AND SERVICING
Installing
228.
Figure 5.217: Single-Reel Drive Shown – Double Reel
Similar
C
Figure 5.218: Single-Reel Drive Shown – Double Reel
Similar
A
Figure 5.219: Single-Reel Drive Shown – Double Reel
Similar
231
A
A
B
Revision B