MacDon D65 Operator's Manual page 134

5. Push the hose connectors onto the mating receptacle until
the collar on the receptacle snaps into locked position.
6. Remove the cover from electrical receptacle (A).
7. Push the electrical connector onto the receptacle and turn
the collar on the connector to lock it in.
8. Attach the cover to the mating cover on the windrower's
wiring harness.
9. Lower lever (A) and engage it in down position.
10. Before connecting the reel hydraulics, check the fittings. If
the fittings are dirty, clean them.
214327
HEADER ATTACHMENT/DETACHMENT
Figure 4.3: Header Receptacles
A - Electrical Receptacle
C - Case Drain (Double Knife)
E - Return
Figure 4.4: Hose Storage
Figure 4.5: Reel Hose Storage
114
B
A
C
E
B - Knife Drive
D - Draper Drive
A
D
Revision B