MacDon D65 Operator's Manual page 47

Table 2.1 Header Specifications (continued)
PR15 Pick-Up Reel
Delivery opening height (under frame tube at
203 mm [8 in.] cutting height)
Delivery opening height (under frame tube at
203 mm [8 in.] cutting height)
Quantity of tine tubes
Center tube diameter: all reel sizes except 10.7 m (35 ft.) single reel
10.7 m (35 ft.) single header reel only
Finger tip radius
Finger tip radius
Effective reel diameter (via cam profile)
Finger length
Finger spacing (staggered on alternate bats)
Reel drive
Reel speed (auto-adjust from cab using ground speed index)
Frame and Structure
Header width (field mode)
Header width (transport mode—
reel fore-aft fully retracted)
Header width (transport mode—
reel fore-aft fully retracted)
Header width (transport mode—
reel fore-aft fully retracted)
Header width (transport mode—
reel fore-aft fully retracted)
3. Refer to Figure 2.1, page 28
4. Long dividers installed
5. Long dividers removed
214327
PRODUCT OVERVIEW
Center-link fully
retracted
Center-link fully
extended
Factory-set
Adjustment range
Header only
Header only
With HC10 Hay
Conditioner installed
With HC10 Hay
Conditioner installed
27
955 mm (37.6 in.)
1105 mm (43.5 in.)
5, 6, or 9
203 mm (8 in.)
254 mm (10 in.)
800 mm (31.5 in.)
766–800 mm
(30.2– 31.5 in.)
1650 mm (65 in.)
290 mm (11 in.)
150 mm (6 in.)
Hydraulic
0–85 rpm
Cut width + 384 mm
(15.12 in.)
3 4
(B) , 2636 mm (104 in.)
(A) 3 , 5 2452 mm (97 in.)
(B) 3 , 4 2834 mm (112 in.)
(A) 3 , 5 2650 mm (104 in.)
S
S
—
—
—
—
—
—
—
—
S
S
S
—
—
—
—
Revision B