MacDon D65 Operator's Manual page 135

11. Open the cover on header receptacle (A).
12. Push in lock button (B) and pull handle (C) to the half-open
position.
13. Remove the hose bundle with multicoupler (C) from the
windrower, place the multicoupler onto the header
receptacle, and push handle (B) to engage the
connector pins.
14. Push the handle away from the hoses until lock button (A)
snaps out.
15. Raise and lower the header and the reel a few times to
allow trapped air to pass back to the reservoir.
214327
HEADER ATTACHMENT/DETACHMENT
Figure 4.6: Reel Hydraulics Receptacle
Figure 4.7: Reel Hose Connection
115
A
B
C
A
C
B
Revision B