MacDon D65 Operator's Manual page 8

Section
5.3.1 Maintenance Schedule/
Record, page 122
Service Intervals, page 126
5.4.1 Replacing Light Bulbs, page
137
5.7.1 Removing Side Drapers,
page 179
5.7.2 Installing Side Drapers,
page 180
Removing Draper Idler Roller,
page 189
Removing Draper Deck Drive
Roller, page 192
Removing Wide Draper
Deflectors, page 196
214327
Summary of Change
All upper cross auger (UCA) greasing points moved to the 50-hour
interval.
Created new Figure 5.7, page 127
the new versus old UCA kit, and because upper cross auger (UCA)
greasing points were moved to the 50-hour interval.
Added DANGER and Step 1, page
137 to show the new lighting assembly.
Added WARNING:
• To prevent bodily injury from the fall of a raised reel, always
engage the reel safety props before going under the raised reel
for any reason.
Moved Step 5, page 179 and Step
Added Step 1, page 180 to Step
a NOTE.
Added WARNING:
• To prevent bodily injury from the fall of a raised reel, always
engage the reel safety props before going under the raised reel
for any reason.
Added WARNING:
• To prevent bodily injury from the fall of a raised reel, always
engage the reel safety props before going under the raised reel
for any reason.
Moved Step 4, page 192 and Step
Replaced the following DANGER with the following DANGER and
WARNING:
• Old DANGER: To prevent bodily injury or death from the
unexpected start-up or fall of a raised machine, always stop the
engine and remove the key before leaving the operator's seat,
and always engage the safety props before going under the
machine for any reason.
• New DANGER: To prevent bodily injury or death from the
unexpected start-up of the machine, always stop the engine
and remove the key from the ignition before making
adjustments to the machine.
• WARNING: To prevent bodily injury from the fall of a raised
reel, always engage the reel safety props before going under
the raised reel for any reason.
Split Step 3, page 196 and Step
iv
and Figure 5.8, page 128
137. Revised Figure 5.23, page
6, page 179.
5, page 180. Step 6, page 180
5, page 192.
6, page 196 into separate steps.
Internal Use
Only
Technical
Publications
ECN 61273
to show Technical
Publications
ECN 61273
ECN 54889
Technical
Publications
was Technical
Publications
Technical
Publications
Technical
Publications
Technical
Publications
Revision B