MacDon D65 Operator's Manual page 244

1. Lower the header and reel, shut down the engine, and
remove the key from the ignition.
2. Rotate the reel manually until reel endshield support (A)
requiring replacement is accessible.
3. Remove three bolts (B).
4. Lift the end of reel endshield (A) off support (B).
5. Remove the reel endshield from the supports.
214327
MAINTENANCE AND SERVICING
Figure 5.203: Reel Endshields
Figure 5.204: Reel Endshields
Figure 5.205: Reel Endshields
224
A
B
B
A
Revision B