Leveling Header - MacDon D65 Operator's Manual

3.12 Leveling Header

The windrower linkages are factory-set to provide the proper level for the header and should not normally require
adjustment.
NOTE:
The float springs are NOT used to level the header.
1. If the header is not level, check the pressure of the windrower's tires to ensure they are properly inflated. For
instructions, refer to the windrower operator's manual.
2. If the header is still not level, adjust the windrower linkages as required. For instructions, refer to the windrower
operator's manual.
214327
OPERATION
91
Revision B