MacDon D65 Operator's Manual page 241

18. Install bolts (A) securing arm (B) to the center disc.
19. Install reel arm (B) and endshield support (C) to the tail end
of the reel at the applicable tine tube location, and secure
them with bolts (A).
Installing tine tube support (if installed) bushings:
20. Position bushing halves (B) on the tine tube with the
flangeless end adjacent to the reel arm, and position the
lug in each bushing half into the hole in tine tube (A).
21. Slide support (A) onto bushing (B).
214327
MAINTENANCE AND SERVICING
Figure 5.195: Tail End
Figure 5.196: Cam End
Figure 5.197: Support
221
B
A
A
B
C
B
A
Revision B