Header; Divider Latch Kit; Stabilizer Wheels - MacDon D65 Operator's Manual

6.3 Header

6.3.1 Divider Latch Kit

Divider latch kits attach to the endsheets. They allow for quick
removal and storage of endsheet divider cones and, if required,
reduce the transport width of the header. Installation
instructions are included in the kit.
MD #B5607

6.3.2 Stabilizer Wheels

Stabilizer wheels help to stabilize the header in field conditions that would otherwise cause the header to bounce, resulting
in uneven cutting heights.
Installation and adjustment instructions are included in the kit.
This kit is available as an attachment for use with 9.1, 10.7, and
12.2 m (30, 35, and 40 ft.) headers.
MD #C1986
Second Stabilizer Wheel kit:
The Second Stabilizer Wheel kit is available to upgrade the
header to two stabilizer wheels. Each kit consists of one wheel
assembly; two kits are required to upgrade both sides of the
header.
Installation instructions are included with the kit.
MD #B6179
214327
OPTIONS AND ATTACHMENTS
Figure 6.9: Divider Latch
Figure 6.10: Stabilizer Wheel
248
Revision B