Reel Endshield Kit; Short Brace Kit For Center Reel Arm - MacDon D65 Operator's Manual

• 6.1 m (20 ft.) – Steel Fingers MD #B5655
• 7.6 m (25 ft.) – Plastic Fingers MD #B5277
• 9.1 m (30 ft.) – Plastic Fingers MD #B5278
• 9.1 m (30 ft.) – Steel Fingers MD #B5657
• 10.7 m (35 ft.) – Plastic Fingers MD #B5674
NOTE:
You must also order additional endshields when converting the reel.

6.1.4 Reel Endshield Kit

The steel shields provided in the Reel Endshield kit attach to the ends of the reels and help to clear material in heavy, hard-
to-cut crops. They are standard equipment on all headers (except nine-bat reels).
Hardware and installation instructions are included in the kit.
See your MacDon Dealer for more information.

6.1.5 Short Brace Kit For Center Reel Arm

The Short Brace kit for Center Reel Arm consists of a set of
shorter braces and necessary hardware for the center reel
support arm. This kit allows you to move the reel farther back
for applications such as straight cutting canola and cutting
shatter prone crops.
Installation and adjustment instructions are included.
MD #B5605
50. Double-reel units only.
214327
OPTIONS AND ATTACHMENTS
50
50
Figure 6.3: Reel Endshields
Figure 6.4: Short Brace kit (MD #B5605)
244
Revision B