Replacing Draper Idler Roller Bearing - MacDon D65 Operator's Manual

7. Loosen the draper by turning adjuster bolt (A)
counterclockwise.
8. Remove screws (A), tube connectors (B), and nuts from the
draper joint to uncouple the draper.
9. Pull the draper off the idler roller.
10. Remove bolts (A) and washers at the ends of the idler roller.
11. Spread roller arms (B) and (C) and remove the idler roller.

Replacing Draper Idler Roller Bearing

The bearing helps the roller turn. The bearing needs to be removed when replacing it.
1. Remove the draper idler roller assembly. For instructions, refer to
214327
MAINTENANCE AND SERVICING
Figure 5.126: Tensioner
Figure 5.127: Draper Joint
Figure 5.128: Idler Roller
Removing Draper Idler Roller, page
190
A
A
B
A
B
A
C
189.
Revision B