Poor Color Reproduction - Xerox Phaser 6115MFP Service Manual

Print-Quality Troubleshooting

Poor Color Reproduction

Initial Actions
5-26
The colors in the copy is not a good reproduction of the original.
Verify the media used is supported by this printer.
Verify the media settings are correct at the Control Panel.
Troubleshooting Reference Table
Applicable Parts Example Print
Transfer Belt
Unit, PL4.15.5
Engine Control
Board, PL4.19.15
High Voltage
Unit, PL4.19.6
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the media.
Is the paper damp?
Inspect the Transfer Belt
2
Unit.
Is the terminal dirty?
3 Has the problem been
eliminated?
Chrysanthemum x morifolium
Yes
Replace with new,
unwrapped paper.
Clean the contacts. If
the problem persists,
go to Step 3.
Complete
Phaser 6115MFP Multifunction Product Service Manual
Chrysanthemum x morifolium
Unexpected Colors
No
Go to Step 2.
Go to Step 3.
Replace the following
units, listed in order,
until problem is
eliminated:
Transfer Belt Unit
(page 8-33)
Engine Control
Board (page 8-57)
High Voltage Unit
(page 8-50)