A - Front of drive
3.
Align the screw holes on conduit bracket 2 with the screw holes on conduit bracket 1.
Tighten the screws to a tightening torque of 0.98 N∙m to 1.33 N∙m (8.67 lb.∙in. to 11.77 lb.∙in.).
A - Conduit bracket 2
■
Attach the Protective Cover (Procedure F)
Attach the Top Protective Cover
Align the screw holes of the top protective cover with the screw holes on the top of the drive.
Tighten the screws to a tightening torque of 0.98 N∙m to 1.33 N∙m (8.67 lb.∙in. to 11.77 lb.∙in.) to attach the cover.
YASKAWA ELECTRIC SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
B - Screw holes on bottom
Figure 2.60 Locations of Screw Holes on Bottom
Figure 2.61 Attach Conduit Bracket 2
Figure 2.62 Attach the Top Protective Cover
2 Mechanical & Electrical Installation
49