2.
Push
(Menu).
3.
Push
or
to select [User Custom Parameters], then push
4.
Push
or
to show the parameter to examine.
5.
To change the parameter settings, push
6.
Push
or
to select the digit, then push
7.
Change the value, push
The parameter setting procedure is complete.
■
Save the Backup of Parameters
You can save a backup of the drive parameters to the keypad. The keypad can store parameter setting values for a
maximum of four drives in different storage areas. Making backups of the parameter settings can save time when
setting parameters after replacing a drive. If you set up more than one drive, you can copy the parameter settings
from a drive that completed a test run to the other drives.
YASKAWA ELECTRIC SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
or
to select the parameter, then push
or
.
3 Startup Procedure and Test Run
.
to change the value.
.
137