Table of Contents
Advertisement
LED
Status
Illuminated
Flashing
C
RUN
Flashing Quickly
*1
OFF
*1
Refer to Figure 3.6 for the difference between flashing and flashing quickly.
/
◆
Keypad Operation
■
Use the HOME Screen
The functions that can be controlled from the HOME screen and the content that is displayed are explained in the
following.
View Monitors Shown in Home Screen
This figure shows monitor data in the data display area of the HOME screen.
YASKAWA ELECTRIC SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
The drive is in regular operation.
• The drive is decelerating to stop.
• The drive received a Run command but the frequency reference is 0 Hz.
*1
• The drive received a DC Injection Braking command.
• The drive received a Run command from the MFDI terminals and is switching to REMOTE
Mode while the drive is in LOCAL Mode.
• The drive received a Run command from the MFDI terminals when the drive is not in
Drive Mode.
• The drive received a Fast Stop command.
• The safety function shuts off the drive output.
• The user pushed
• The drive is energized with an active Run command and b1-17 = 0 [Run Command at
Power Up = Disregard Existing RUN Command].
• The drive is set to coast-to-stop with timer (b1-03 = 3 [Stopping Method Selection = Coast
to Stop with Timer]), and the Run command is disabled then enabled during the Run wait
time.
The motor is stopped.
Figure 3.6 LED Flashing Statuses
Figure 3.7 Relation between RUN LED and Drive Operation
3 Startup Procedure and Test Run
Description
on the keypad while the drive is operating in REMOTE Mode.
123
Advertisement
Table of Contents
