Erase Parameters Backed Up To The Keypad - YASKAWA CIPR-CR70A Series Technical Manual

5.
Push or to select [Verify (check for mismatch)], then push
6.
Push or to select the data to verify, then push
The keypad shows "End" when the parameter settings backed up in the keypad agree with the parameter settings
copied to the drive.
Note:
The keypad shows vFyE [Parameters do not Match] when the parameter settings backed up in the keypad do not agree with the
parameter settings copied to the drive. Push one of the keys to return to the screen in Step 6.
■

Erase Parameters Backed Up to the Keypad

This procedure deletes parameters that were backed up to the keypad.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not on , push
2.
Push (Menu).
3.
Push or to select [Parameter Backup/Restore], then push
4.
Push or to select the item to delete, then push
YASKAWA ELECTRIC SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
.
(Back) to show [Home] on
3 Startup Procedure and Test Run
.
.
.
.
141