Working With The Job Queues - Stratasys Fortus 360mc User Manual

Working with the Job Queues

1.
There are two, separate, job queues available on the 360mc/400mc - the Job
Queue; and the Sample Job Queue.
2.
From the Main Menu select
3.
Select
Note: The total number of jobs currently in the queue is
displayed at the end of the line.
A.
B.
>Build Job..
Operator Control..
Modeler Status..
Maintenance..
, or
Show Job Queue
Build Next Job:
Build Last Job:
>Show Job Queue..
Show Sample Job Queue..
The
Show Job Queue
application on your PC workstation. (For information on Insight, see
"Operating Insight" on page
• Up to four jobs can be viewed on the display panel.
• If the job queue contains more than four jobs, use the arrow keys to
scroll the display up or down through the available jobs.
• Use the arrow keys to select a job in the queue.
• Press the Enter key to build a selected job.
• Press the <.> (dot) key to show the details of the selected job.
• Press 1 to move a selected job to the top of the queue.
• Press DEL to delete a selected job from the queue.
• Press 9 to copy the job to the sample queue (job queue only).
Show Sample Job Queue
the system. The 360mc/400mc comes with several sample job files
permanently installed on the system. These files cannot be deleted (For
the Sample Job Queue the (DEL) key does not delete pre-installed sample
job files).
• Press the <.> (dot) key to toggle between all sample jobs and only jobs
for the current system configuration.
• Up to four jobs can be viewed on the display panel.
and press ENTER.
Build Job
|*Tips: Model T16
|* Support T16
Show Sample Job Queue
motor housing <E>
rotor <E>
(jobs for cfg)
menu - contains files downloaded from the Insight
5-1.)
menu - contains files that are helpful for testing
4-29
, and press ENTER.
(6 Jobs)