Command set of the HBM interpreter
Important agreements
26
If an additional parameter - e.g. Parameter 2 - is excluded, the separator
must be included.
E.g.
ASA1,,0(x)
The commands act on all selected (active) channels (see CHS command).
5.1.3
Data output structure
q1, q2...qn(y)
Example 1:
*IDN?(x)
HBM,DMP41,4D:5B:B9:02:00:00,1.0.3.2(y)
Example 2:
CHS?0(x)
3(y)
The responses sent by the DMP41 are indicated in italics in this
documentation (second line in examples).
Output values:
q1,q2...qn
Numerical values with preceding sign, character strings
(always in " ") or '?' as error message
,
Separator
(y)
End sequence (CRLF).
A03474_04_E00_00 HBM: public
DMP41