Table of Contents
Advertisement
Command set of the HBM interpreter
Amplifier functions
COF?
ISR
58
Information
This command applies to all channels of a device.
Information
The measured values are scaled in ASCII format or output in ADU units in
binary format.
Change Output Format Query
Query measured value output format
Syntax:
COF?(x)
Parameter:
none
Effect:
Code number of measured value output format is output.
Response:
q1(y)
Code number of the output format (see COF command).
Example:
COF?(x)
0(y)
Measured values, Channel No. and Status are output in
ASCII format.
Input Sampling Rate
Set measured value transfer rate
Syntax:
ISR p1(x)
Parameter:
p1
Divider value for the data rate with measured value output
via an interface.
Effect:
This command ensures output in a fixed timeslot for mea
sured value output using the command MSV?x,y.
The relationship between parameter p1 and the output rate
results from the calculation below.
The following calculation applies for the determination of the
input value for p1:
Internal cycle frequency
p1 =
Measured value transfer rate
A03474_04_E00_00 HBM: public
(=75 Hz)
1...75
=
DMP41
Advertisement
Table of Contents
