Table of Contents
Advertisement
DMP41
Example:
BDR4800,2,1(x)
0(y)
The interface was set to 4800 baud.
S Query commands:
Measured values or device settings are read out from the DMP41 and
displayed on the screen.
Example:
BDR?(x)
4800,2,1,1(y)
The RS‐232 interface is set to 4800 baud,
Even Parity and 1 Stop Bit.
5.1.2
Command structure
Command shortform
*TTT?
Example:
*
only in IEEE standard commands
TTT
Command shortform as alpha character (a ... z)
?
only in query commands
p1, p2...pn
Parameter values, consisting of
a preceding sign (+/-) and numbers (0...9)
or character strings (always inquotes " ").
A positive sign can also be omitted.
Separator
(x)
Command end:
Line Feed (LF), semicolon (;),
Carriage Return/Line Feed (CRLF) or
Line Feed/Carriage Return (LFCR).
CR
ASCII sign
Carriage Return = decimal 13
LF
ASCII sign Line Feed = decimal 10
;
ASCII sign Semicolon = decimal 59
A03474_04_E00_00 HBM: public
Command set of the HBM interpreter
Parameter
End character
p1, p2, ...pn (x)
*PRE?(x)
Important agreements
25
Advertisement
Table of Contents
