Command set of the HBM interpreter
Multi‐Client
SWA
74
Start with Adminrights
Start with administrator rights
Syntax:
SWAp1,p2(x)
Parameter:
p1, p2,
P1= Actual password
P2= 0
P2=1
Effect:
Specifies whether the device starts with or without adminis
trator rights.
Response:
(y)
Acknowledge-
ment
0
Password correct
?
Incorrect password or other
Example:
SWA1234,1(x)
0(y)
Password OK. DMP41 display Client starts with administra
tor rights.
SWA1234,1(x)
?(y)
Password incorrect. DMP41 display Client starts with cur
rent settings.
SWA1234,0(x)
0(y)
Password OK. DMP41 display Client starts without admin
istrator rights.
A03474_04_E00_00 HBM: public
start without administrator rights
start with administrator rights
Significance
parameter error
DMP41