ME250S6
2.2 Supply voltage
+14.5 to +15.5 V (max.120 mA) . . . . .
−14.5 to −15.5 V (max.120 mA) . . . . .
Zero operating voltage . . . . . . . . . . . . .
The supply voltage ripple should not exceed 0.1 V (peak-to-peak). In the
event of incorrect polarity the connections are internally disabled and the
amplifier is protected from damage. Single-pole connection should be
avoided. In order to keep power loss to a minimum, the chosen supply voltage
should not be unnecessarily high. The permissible range is "15.6 to "25 V.
2.3 Measurement signal output
Output voltage: "10 V; R
Zero operating voltage . . . . . . . . . . . . .
The output is provided for connection to a display and/or recording device.
A0827-4.1 en/de
Pin
Pin
Pin
5 k
Pin 18c
L
Pin 19c
Channel 1 + Channel 2
15a
16a
19c
Channel 1
Channel 2
19a
20a
9
+
−
−
HBM