Command set of the HBM interpreter
Communication
SRB?
36
Acknowledgement
0
?
None
Example:
SRB1(x)
0(y)
The command was acknowledged.
The setting commands now output an acknowledgement
response 0 or ?.
Select Response Behavior Query
Output of the interface acknowledgement behavior
Syntax:
SRB?(x)
Parameter:
none
Effect:
The output behavior (acknowledgement switched on or off)
of the interface is output (see SRB command).
Response:
q1(y)
q1
Switch acknowledgment output on/off
0
Acknowledgment output switched off
1
Acknowledgment output switched on
2
Command; Response is returned
Example:
SRB?(x)
1(y)
The setting commands do not output a response.
SRB2(x)
SRB2;0
Command returned again from here
IDN?
IDN?; HBM,DMP41,D1:09:BA:02.00.00,1.0.4.0
A03474_04_E00_00 HBM: public
Significance
Command is executed when SRB 1(x)
was input
Error when SRB 1(x) was input
Command is executed
or
error when SRB 0(x) was input
DMP41