Table of Contents
Advertisement
DMP41
also use a router that separates both networks and only transmits
messages between the two networks when necessary.
3.1.1
Ports and addresses used
TCP server on DMP41:
IP :
as set, or DHCP = Default
Port:
1234
Multicast server for device scan:
IP :
239.255.77.76
Port :
31416
Important
The ports must be enabled for access to the server (firewall).
Important
Cable connection for Ethernet interface !
If the interface cable for the interface is not connected, an IP address
cannot be set.
Ensure that the interface cables for the Ethernet interface are always
connected before setting up the DMP41.
3.1.2
Setting the Ethernet interface
When the Ethernet interface is set to DHCP (Dynamic Host Configuration
Protocol), the addresses assigned by the DHCP server to DMP41 are dis
played in the address fields.
It is also possible to set fixed addresses directly in the DMP41
(IP address, network mask, Gateway, DHCP).
A03474_04_E00_00 HBM: public
Communication with the DMP
Ethernet interface
13
Advertisement
Table of Contents
