HBM DMP41 Interface Description page 77

DEN
DMP41
P14
1)
P15 16
P16
P17 2
P18
1)
Note: Meaning of second column: e.g. filter frequency index
for measurement channel 1
P19 1
P20
P21 PPM
P22
P23 0
P24 0
Following the respective measured values of a specific signal (e.g. absolute,
mV/V) for all channels, the states for these measured values are also output
directly after one another (separated by commas).
Only then does the next signal follow (all measured values of the signal (e.g.
gross, mV/V)) and then all states of the measured values of this signal.
Example: Also with 2 channels
P25 −1.500 Measured value channel 1 Signal 23 = Measured value gross in
P26 1.123455 Measured value channel 2 Signal 23 = Measured value gross in
P27 −1501 Status channel 1 Signal 23 = Measured value gross in mV/V
P28 −1501 Status channel 2 Signal 23 = Measured value gross in mV/V
P29 125346 Measured value channel 1 Signal 24 = Measured value net in mV/V
P30 212324 Measured value channel 2 Signal 24 = Measured value net in mV/V
P31 Status channel 1 Signal 24 = Measured value net in mV/V
P32 Status channel 2 Signal 24 = Measured value net in mV/V
....
Pn
Effect: Returns the channel information according to the specified
formats.
Device Name
Syntax: DENp1(x)
A03474_04_E00_00 HBM: public
Command set of the HBM interpreter
Filter characteristic for measurement channel 2
Filter frequency for measurement channel 1
Filter frequency for measurement channel 2
Excitation voltage channel 1
Excitation voltage channel 2
Sensitivity channel 1
Sensitivity channel 2
User Unit channel 1
User Unit channel 2
Status measured value of measurement channel 1
Status measured value of measurement channel 2
mV/V
mV/V
Other
77