HBM DMP41 Interface Description page 76

Command set of the HBM interpreter
Other
CIN?
76
2 Value in %, dimmed intensity in percent
3 Value in seconds
q1(y)
0.100
Example: BGL?(x)
100,25,600(y)
Standard intensity set to 100%, dimmed intensity set to
25%.
Switch to dimmed intensity after 600 seconds idle time (no
screen contact and no keys pressed).
Get Channel Information
Special command that returns all information for display of measured values
Syntax: CIN?(x)
Parameter:
The response is then displayed dependent on the number of channels.
The returned parameters separated by commas (e.g. 6,37768,0.00,3 ...)
have the following significance
p
P1 2 Number of existing measurement channels (important for the correct
P2 37768
P3 0.00 Temperature channel 1, temperature in
P4 3
P5 0.00
P6 3
Example: Number of channels 2
P7 CHn
P8
P9 0
P10
P11 16
P12
P13 0
A03474_04_E00_00 HBM: public
evaluation of this response)
Status of actual measured value line
o
Status of temperature channel 1
Temperature channel 6
Status of temperature channel 6
Name of measurement channel 1
Name of measurement channel 2
Filter characteristic for measurement channel 1
Filter characteristic for measurement channel 2
Filter frequency for measurement channel 1
Filter frequency for measurement channel 2
Filter characteristic for measurement channel 1
C (always 2 decimal places)
DMP41