Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 196

Expansion cards and backup units
Removing the slot cover
Figure 140: Removing the slot cover - example riser module 1
▶ Remove the slot cover.
CAUTION
▶
Keep the slot cover for future use.
▶
If the expansion card is removed and not replaced with a new
one, the slot cover must be reinstalled due to cooling, to comply
with applicable EMC regulations and to protect against fire.
Installing the expansion card
▶ Please read the documentation supplied with the expansion card.
▶ If applicable, install a slot bracket to the expansion card, see
slot bracket" on page
Figure 141: Installing an expansion card - example riser module 1
196
183.
Upgrade and Maintenance Manual
"Installing a
RX1330 M5