Preliminary steps
▶
"Locating the defective server" on page
▶
"Verifying the system time settings" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
Replacing the defective CMOS battery
Figure 236: Replacing the CMOS battery
▶ Push the locking spring in direction of the arrow (1) and remove the CMOS
battery out of its socket (2).
▶ Push the locking spring in direction of the arrow (3 ) and insert a new CMOS
battery of the same type into the socket (4).
RX1330 M5
46.
65.
Upgrade and Maintenance Manual
System board and components
43.
82.
47.
49.
45.
293