Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 330

System board and components
▶ Remove all fan modules, see
page 175.
▶ Remove all memory modules, see
page 227.
Before removing the memory modules, take a note on the installation
slot number for each memory module. Ensure that you reinstall the
memory modules in the slot they were located before the
replacement.
▶ Remove all riser modules, see
▶ If applicable, remove all expansion cards, see
card" on page 200.
▶ Remove the iRMC microSD card, see
on page 308.
▶ If applicable, remove all M.2 SSDs, see
page 317.
▶ If applicable, remove the Dual microSD 64GB Enterprise, see
the Dual microSD 64GB Enterprise" on page
Removing the defective system board
▶ Disconnect all cables from the system board.
330
"Removing the defective fan module" on
"Removing a memory module" on
"Removing a riser module" on page
"Removing the iRMC microSD card"
Upgrade and Maintenance Manual
"Removing an expansion
"Removing the M.2 SSD" on
323.
63.
"Removing
RX1330 M5