Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 156

Hard disk drive (HDD) / solid state disk (SSD)
Installing the new 4x 2.5-inch HDD backplane
A
Figure 89: Installing the 4x 2.5-inch HDD backplane (NVMe variant)
▶ Position the HDD backplane on the four hooks (see circles).
▶ Push the HDD backplane downward. Make sure that the HDD backplane fits
behind the guide pins (A).
CAUTION
▶
Ensure that none of the cables are strained or damaged!
Figure 90: Connecting the OOB cable (NVMe variant)
▶ Connect the OOB cable to the HDD backplane.
156
A
Upgrade and Maintenance Manual RX1330 M5