Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 203

Note on network settings recovery
When replacing network controllers, network configuration settings in
the OS will be lost and replaced by default values. This applies to all
static IP address and LAN teaming configurations.
Ensure to note down your current network settings before replacing a
network controller.
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶ If applicable,
"Configuring LAN teaming" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Locating the defective component" on page
▶ Remove the corresponding riser module, see
page 63.
Removing the defective expansion card
▶ Remove the expansion card, see
page 201.
▶ If the slot bracket on the defective expansion card is to be reused, remove it
from the expansion card, see
Installing the new expansion card
▶ If applicable, install the slot bracket, see
page 183.
▶ Install the expansion card, see
RX1330 M5
Expansion cards and backup units
46.
"Removing the expansion card" on
"Removing a slot bracket" on page
"Installing the expansion card" on page
Upgrade and Maintenance Manual
43.
92.
69.
47.
49.
44.
"Removing a riser module" on
"Installing a slot bracket" on
45.
184.
196.
203