Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 268

Front panel
▶ Push the front VGA module into place.
▶ Fasten the front VGA module with one screw (see circle).
Connecting the front VGA cable
Figure 214: Connecting the front VGA cable
▶ Connect the front VGA cable to the system board connector "Front VGA"
(see circle).
Concluding steps
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
268
66.
53.
57.
60.
Upgrade and Maintenance Manual
61.
RX1330 M5