Front Panel; Safety Notes; Basic Information - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

13

Front panel

13.1

Safety notes

CAUTION
▶
When inserting the COP (Common Operation Panel) into the
server, ensure not to pinch or strain any connected cables.
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
For more information, see
13.2

Basic information

In case of a defective ambient temperature sensor, please replace Common
Operation panel (COP).
COP
The COP is mounted on the right side ear. A flat cable is used for connection to
the system board.
Front VGA (option) and front USB Type C
A front VGA module is available in the RX1330 M5 with 4x 3.5-inch HDD
subsystem and 4x or 8x 2.5-inch HDD subsystem. The front VGA module
offers a front VGA connector (option) and a front USB Type C connector.
A front VGA connector can be installed as an option in the RX1330 M5S. A
front USB Type C connector is already available.
RX1330 M5
"Important information" on page
Upgrade and Maintenance Manual
29.
257