Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 170

Hard disk drive (HDD) / solid state disk (SSD)
Installing additional HDD/SSD modules
In configuration with only one 4x 2.5-inch HDD backplane dummy locks
are installed to make it impossible to equip the bays with no HDD
backplane behind.
Figure 114: Removing the dummy lock
▶ Only valid after upgrading the server with the second HDD backplane: pull
the dummy lock out of the dummy cover. Please be aware that the dummy
lock can be damaged.
▶ Insert additional HDD/SSD modules, see
PCIe SSD modules" on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ Update the system information of your server using the Chassis ID Prom
Tool, see "Installing the front cover with lock" on page
corresponding system name.
▶
"Performing a RAID array rebuild" on page
170
138.
53.
57.
60.
Upgrade and Maintenance Manual
"Installing 2.5-inch HDD / SSD /
61.
61. Select the
87.
RX1330 M5