Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 151

Figure 82: Removing the 4x 2.5-inch HDD backplane (NVMe variant)
▶ Pull the HDD backplane upward until the four hooks (see circles) disengage.
▶ Take out the HDD backplane.
Installing the new right side 4x 2.5-inch HDD backplane
Figure 83: Installing the 4x 2.5-inch HDD backplane (NVMe variant)
▶ Position the HDD backplane on the four hooks (see circles).
▶ Push the HDD backplane downward. Make sure that the HDD backplane fits
behind the guide pins (A).
CAUTION
▶
Ensure that none of the cables are strained or damaged!
RX1330 M5
Hard disk drive (HDD) / solid state disk (SSD)
A
A
Upgrade and Maintenance Manual
A
151