Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 351

Status
flashing orange
HDD/SSD activity indicator (5)
Status
flashing green
iRMC-related status signals
ID indicator
flashing blue
flashing blue
For more information about the iRMC flash procedure, see "Basic
software procedures" in the "FUJITSU Server PRIMERGY RX1330 M5
Upgrade and Maintenance Manual".
HDD prefailure detection
Depending on your hardware configuration HDD prefailure detection will be
supported.
RX1330 M5
Description
Non-CSS component failure detected.
Possible causes:
– System is out of the specified temperature range
– Defective sensor
– CPU error
– Error detected by server management software
Description
Data access in progress.
Global error
indicator
off
flashing orange An emergency flash of the iRMC firmware
Upgrade and Maintenance Manual
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
is in progress.
Appendix A
351