Fans; Safety Notes; Basic Information - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

8

Fans

8.1

Safety notes

CAUTION
▶
Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
▶
Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components
to cool down before installing or removing internal options.
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
▶
The procedure of installation on this notes might change depending
on a configuration of options.
▶
For more information, see
8.2

Basic information

The fan modules are available in two variants:
– fan module with single rotor fan
– fan module with dual rotor fan
The fan modules with dual rotor fan are only valid for RX1330 M5 with
redundant PSU.
RX1330 M5
"Important information" on page
Upgrade and Maintenance Manual
29.
171