Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 276

Front panel
Removing the defective front USB
▶ Disconnect the front USB cable from the system board connector "TYPE C
FRONT ".
Figure 221: Removing the front VGA module
▶ Remove the screw (see circle).
▶ Pull out the front VGA module.
A
Figure 222: Removing the front USB connector
▶ Remove the two screws (see circles).
▶ Remove the front USB cable from the cable clamp (A).
▶ Pull the front USB connector out of the recess in the front VGA module.
▶ Thread the front USB cable through the opening and remove it.
276 Upgrade and Maintenance Manual RX1330 M5