Expansion cards and backup units
Installing the new riser card
Figure 149: Installing the riser card - example riser module 1
▶ Insert the riser card.
▶ Fasten the riser card with two screws (see circles).
▶ Install the expansion card, see
Concluding steps
▶ Install the corresponding riser module, see
page
62.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
9.5.6
Upgrading to the full height riser module
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
206
"Installing the expansion card" on page
53.
57.
60.
Upgrade and Maintenance Manual
"Handling riser modules" on
61.
Hardware: 10 minutes
196.
RX1330 M5