Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 310

System board and components
Replacing the iRMC microSD card
▶ Remove the defective iRMC microSD card, see
microSD card" on page
CAUTION
(not valid for Europe, Middle East, India and Africa)
The iRMC microSD card contains customer information.
▶
After removing the iRMC microSD card, hand the card over to
the customer.
▶
If the customer requests disposal of the defective microSD card,
proceed as follows: Using a pair of side-cutting pliers, cut the
microSD card in half.
▶ Install the new iRMC microSD card, see
on page 306.
Concluding steps
▶ If applicable, install the riser module 1, see
page 64.
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶ Update the BIOS or iRMC S6 firmware using the iRMC S6 web interface,
see "Updating the BIOS or iRMC S6 firmware using the iRMC S6 web
interface".
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
Updating the BIOS or iRMC S6 firmware using the iRMC S6 web interface
This operation will save the firmware image used for firmware restore
feature after system board exchange to the iRMC microSD card.
310
308.
66.
53.
57.
60.
Upgrade and Maintenance Manual
"Removing the iRMC
"Installing the iRMC microSD card"
"Installing a riser module" on
61.
RX1330 M5