Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 148

Hard disk drive (HDD) / solid state disk (SSD)
▶ Push the HDD backplane downward. Make sure that the HDD backplane fits
behind the guide pins (A).
CAUTION
▶
Ensure that none of the cables are strained or damaged!
Figure 79: Connecting the cables
1 SAS cable
2 OOB cable
▶ Connect the cables to the HDD backplane.
For the cable plan, see
Figure 80: Installing the ODD
▶ If applicable, push the ODD into its bay until the ODD latch engages in the
HDD backplane.
▶ If applicable, connect the ODD cables to the ODD (see circle).
148
3
"Appendix B" on page
Upgrade and Maintenance Manual
Power cable
363.
RX1330 M5