Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 242

Processor (CPU)
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
Removing the defective heat sink
▶ Remove the heat sink, see
▶ Remove the residual thermal paste from the CPU surface.
▶ Clean the CPU surface using a lint-free cloth.
Installing the new heat sink
▶ Remove the protective cover on the underside of the new heat sink.
CAUTION
▶
Do not touch the thermal paste on the underside of the heat sink.
▶ Install the heat sink, see
Concluding steps
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
242
65.
"Removing the heat sink" on page
"Installing the heat sink" on page
66.
53.
57.
60.
Upgrade and Maintenance Manual
47.
49.
61.
233.
240.
RX1330 M5