Reassembling" On Page; Connecting The Power Cord" On Page; Switching On The Server" On Page - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

System board and components
▶ Install the iRMC microSD card, see
page 306.
▶ Install all fan modules, see
▶ If applicable, install all expansion cards, see
on page 195.
▶ Install all riser modules, see
▶ Install all memory modules, see
Ensure that you reinstall each memory module in the slot it was
located before the replacement.
▶ Install the air duct, see
▶

"Reassembling" on page

▶ Install all PSUs, see
▶ Connect all external cables.
▶

"Connecting the power cord" on page

▶

"Switching on the server" on page

▶ If applicable,
"Installing the front cover with lock" on page
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Exit menu.
● Select Commit settings and Exit.
● Verify that the Global Error indicator stops flashing.
334
"Installing the iRMC microSD card" on
"Installing the new fan module" on page
"Installing a riser module" on page
"Installing a memory module" on page
"Installing the air duct" on page
53.
"Installing a hot-plug PSU" on page
57.
60.
Upgrade and Maintenance Manual
"Installing an expansion card"
66.
102.
61.
176.
64.
224.
RX1330 M5