▶ Connect the power cable that is coming from connector "PWR2" on the
system board to the power distribution board.
Figure 51: Connecting cables (C)
▶ Connect the power cable that is coming from connector "PWR1" on the
system board to the power distribution board (1).
▶ Connect the power cable that is coming from the HDD backplane to the
power distribution board (2).
▶ Install all PSUs, see
Concluding steps
▶
"Reassembling" on page 53
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
RX1330 M5
"Installing a hot-plug PSU" on page
57.
60.
Upgrade and Maintenance Manual
Power supply unit (PSU)
102.
61.
86.
117