Looking For The Guid Address Of An Infiniband Or Omni-Path Controller; Looking For Sas Addresses Of Sas Controllers For External Devices - Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual

Basic software procedures
Checking the label
▶ If available, check the label on the controller. Beside the part number, you
may find the WWN address.
Using an UEFI BIOS
▶ Enter the BIOS setup menu.
▶ Select the Advanced menu.
The addresses are displayed at the Advanced menu main page.
Only network controllers supporting the Command Line Protocol
(CLP) will be displayed.
5.3.13.4 Looking for the GUID address of an infiniband or Omni-Path
controller
▶ If available, check the label on the controller. Beside the part number, you
may find the GUID address.
▶ Inform the customer about the new or changed GUID address.
5.3.13.5 Looking for SAS addresses of SAS controllers for external
devices
These addresses can be found using the ServerView RAID Manager.
▶ Start the ServerView RAID Manager and log in.
▶ Select the desired SAS controller.
In the General tab you can find data on the selected object including its SAS
address.
For more information, see the "ServerView RAID Manager" user
guide.
▶ Inform the customer about the new SAS address. The customer need the
new SAS address, especially when the server is connected to a Fujitsu
Storage ETERNUS system.
90 Upgrade and Maintenance Manual RX1330 M5