Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 139

Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶ Locate the correct drive bay, see
Removing a 2.5-inch HDD/SSD dummy module
Figure 71: Removing a 2.5-inch HDD/SSD dummy module
▶ Press both tabs together (1) and pull the dummy module out of its bay (2).
CAUTION
▶
Keep the dummy module for future use.
▶
Always replace dummy modules into unused HDD/SSD bays to
comply with applicable EMC regulations and satisfy cooling
requirements.
RX1330 M5
Hard disk drive (HDD) / solid state disk (SSD)
"Overview of configurations" on page
Upgrade and Maintenance Manual
45.
136.
139