Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 277

Front panel
Installing the new front USB
▶ Thread the new front USB cable through the opening.
A
Figure 223: Installing the front USB connector
▶ Push the front USB connector into the recess in the front VGA module.
▶ Fasten the front USB connector with the two screws (see circles).
▶ Fasten the front USB cable with the cable clamp (A).
Figure 224: Installing the front VGA module
▶ Push the front VGA module into place.
▶ Fasten the front VGA module with one screw (see circle).
RX1330 M5 Upgrade and Maintenance Manual 277