Fujitsu PRIMERGY RX1330 M5 Upgrade And Maintenance Manual page 304

System board and components
CAUTION
▶
Advise your contact persons that they must provide you with all
recovery keys which belong to the system to restore them in the
TPM later.
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Remove all PSUs, see
▶
"Getting access to the component" on page
▶ Remove the air duct, see
▶ Remove all fan modules, see
page 175.
▶ Remove all riser modules, see
▶ Remove the system board, see
page 330.
Removing the defective TPM
▶ Remove the TPM, see
▶ Leave the TPM spacer on the system board when removing the defective
TPM.
Installing the new TPM
The TPM spacer is already present on the system board.
▶ Install the TPM, see
304
46.
"Removing a hot-plug PSU" on page
"Removing the air duct" on page
"Removing the defective fan module" on
"Removing a riser module" on page
"Removing the defective system board" on
"Removing the TPM" on page
"Installing the TPM" on page
Upgrade and Maintenance Manual
43.
69.
47.
49.
301.
296.
45.
105.
65.
63.
RX1330 M5