Overlay And Capture; Advanced Settings - HIKVISION DS-2XC6285G0-L User Manual

2. Click Add to add a rule and set its name.
3. Set a rule.
People Number OSD
It displays the real-time people number in the live view window. You can drag the mouse to
adjust the OSD window location.
Alarm Times Per Exception
It refers to the alarm times after an alarm is triggered. If you do not check it and set the
times, the device will keep sending alarms.
Alarm Interval
Within the set Alarm Interval, the same alarm will not be uploaded.
First Alarm Delay
When the first alarm is triggered, the alarm will be uploaded after a set time period.
Note
Waiting time exception detection (dwell time exception alarm) supports Alarm Times Per
Exception, Alarm Interval and First Alarm Delay settings only on the condition that the Alarm
Trigger Condition is Greater Than Threshold A.
4. Click to draw a region in the live view window, left click the end-points in the live view
window to define the boundary of the set rule region, and right click to finish drawing.
Note
Up to 8 regions can be set at the same time.
●
Try not to overlap the regions.
●
5. Check Dwell Time Exception Alarm, and set Alarm Trigger Condition and Alarm Threshold.
6. Set arming schedule. See Set Arming Schedule .
7. Set linkage method. See Linkage Method Settings .
8. Click Save.
9. Optional: Set text overlay. For detailed settings, refer to Overlay and Capture .
10. Optional: View version and set filtering condition. For detailed settings, refer to Advanced
Settings .

10.5.2 Overlay and Capture

Go to VCA → People Management → Overlay & Capture . Check the information you want to
overlay on the captured pictures. You can also click

10.5.3 Advanced Settings

Set the advanced parameters for people management function and click Save.
Network Camera User Manual
93
to adjust the order.